How to Repair Your iPhone Back Glass?
By Injured Gadgets - July 7, 2021 4817 Views
The iPhone is one of the most popular smartphones of all the time. Ever since Apple has installed a back glass to support wireless charging, it has become even more attractive. However, it has also become incredibly fragile.
As a mobile repair technician, you probably have received tens of iPhones with broken back glass to repair. The most difficult part here is not the installation of new rear housing but removing the broken one.
This article, shares a step-by-step guide to repair broken back glass. But before we get started, let’s look at different options for replacing the rear housing.
Different Ways to Remove the Rear Glass
Using a Laser Machine
The iPhone back glass is bonded with super-high-strength glue. A laser machine can burn the glue without affecting other components of the phone. However, the laser machine itself is costly (around $2,000).
Using Heat and Pry Tool
Extreme heat would eventually burn the glue, allowing you to remove the glass. However, you will need to keep the housing stock in a place (it will be too hot to touch). You can use a metal phone holder with a clamp to ensure the holder doesn’t move.
This will allow you to distribute the heat evenly over the back glass and remove it without damaging other components of the phone. The metal holder and clamp will cost you around $100. So, this seems more feasible than a laser machine.
That said, let’s look at the steps to repair the broken rear glass.
How to Repair iPhone Back Glass?
Below are the steps for the iPhone XS Max back glass replacement. These steps you can follow even for other iPhone Models.
Disassemble the Device
The first step to repairing the rear glass is disassembling the device. If any plastic component is left, the extreme heat can melt them, and they would need to be replaced, thereby increasing the repair cost.
Use the Metal Holder and Clamp to Secure the iPhone
Metal phone holders can be adjusted as per the phone’s size. Make sure the iPhone is fixed appropriately to prevent any damages during heating. Clamp the holder to the table to avoid it moving around.
Heat the Back Glass
Now you need to find the right place to begin removing the back glass. You might even need to crack the glass further to find an entrance. As soon as you find the right spot, start heating the rear glass to remove it.
By spreading the heat evenly throughout the back glass, you will be able to remove it entirely in less than two minutes. However, make sure you don’t overheat near the bottom of the device, as microphones are located there.
Clean the Housing
Now that you have removed the broken glass, clean the housing for small pieces of glass and remaining glue. You can use a razor blade and rubbing alcohol spray to clean the housing properly.
Lay Down the Adhesive
Once you have cleaned the phone thoroughly, it’s time to put on the adhesive. You can choose from pre-cut adhesive or specially designed back cover adhesive. Spread the glue evenly to ensure the glass sticks properly.
Install the Rear Cover
You need the right iPhone back glass to replace it correctly. We recommend choosing a rear cover with a big hole as it doesn’t require you to remove the frame. This makes the iPhone back glass repair process simpler and fast.
Check if the rear glass fits perfectly and that there is no gap. Then, coat glue and install the new back glass. Once installed, keep anything heavy on the rear housing for around 15-20 minutes.
Test the Phone
The iPhone back glass repair process is complete. It’s time to test the device. Apart from the functionalities, check if the wireless charging is working properly.
Tips for iPhone Back Glass Replacement
- Before removing the broken rear glass, paste double-sided adhesive tape on the screen and fix the phone using a metal holder and clamp to keep the iPhone stable.
- When removing the rear cover, the temperature should not be high and should be distributed evenly. If not, the plastic components will be melted.
- Remove the small pieces of glass and glue before putting the adhesive.
- Keep a heavy object on the back glass for at least 15-20 minutes.
Wrap Up
iPhone back glass repair isn’t difficult, provided you follow the right steps. The six steps mentioned above can help you with iPhone back glass replacement at a nominal cost, allowing you to boost your profit margins.
You can buy iPhone back glass from Injured Gadgets at a wholesale rate to further reduce your repair costs and increase your profits. Injured Gadgets offer same-day shipping to ensure you get the necessary repair parts on time.