Select a category below to view the qualities available

IG3 is our standard third-party manufactured replacement part. IG3 has higher quality components than other standard panels available on the market. IG3 comes with a high range backlight for better colors, ESR for brighter LCDs, and polarization. Our team works closely with the third-party manufacturer to deliver the IG quality standards you can trust.

Complete assemblies are our IG3 screens with the addition of pre-installed aftermarket small parts (front camera/proximity sensor/ear speaker/backplate/brackets). These have higher quality components than other standard panels available on the market. Complete Assemblies come with a high range backlight for better colors, ESR for brighter LCDs, and polarization.

FX5 is our premium aftermarket screen line that is manufactured by our factory partner. We sourced FX5 panels to raise the standard of quality for the industry. FX5 is made directly by our factory partner, which gives us full control over product development, raw material sourcing, manufacturing, quality control, etc. FX5 is our flagship quality and our top seller.

FX5 Incell is similar to FX5 in specifications and is manufactured by our factory partner. Using incell technology of an infused LCD + digitizer for the LCD build, it is thinner than other aftermarkets and it offers a lower defective rate.

Premium FOG uses new LCD/OLED panels with aftermarket flex cables. They offer similar color and brightness specifications as refurbished screens, but these high quality aftermarket screens are a great price alternative to premium refurbished screens.

Premium refurbished screens use original panels removed from devices with original flex cables. The original LCD/OLED panels are re-glassed and being original parts, they offer similar performance and screen specifications as originals. These are the highest quality screens available beside OEM Pulls.

OEM pulls are original parts pulled from an original device. All OEM pull panels will have a grading (A, B, or C Grade), which refers to only the cosmetic condition of the glass and not the performance or functioning of the part.

IG3 is our standard third-party manufactured replacement part. IG3 has higher quality components than other standard panels available on the market. IG3 comes with a high range backlight for better colors, ESR for brighter LCDs, and polarization. Our team works closely with the third-party manufacturer to deliver the IG quality standards you can trust.

Incell screens have an infused LCD + digitizer, which allows them to be thinner than other aftermarkets and offer a lower defective rate.

FX5 XR and 11 screens are QC’d with FX5 standards. We source new original LCDs for these panels, which offers the similar coloring of a Premium FOG or Premium Refurbished screen.

FX5 Hard OLED is offered on models that we work directly with trusted factories to offer full warranty coverage on all OLED breaks. Hard OLED quality is considered to be more fragile than soft OLED, but we decrease that percentage through our higher quality materials and manufacturing processes.

Hard OLED screens are non FX5 branded Hard OLED panels. Hard OLED quality is considered to be more fragile than soft OLED. These Hard OLED screens  are similar to our FX5 in specifications, but do not meet our FX5 standards. Thus the most important difference is that we DO NOT warranty OLED panel damage for these screens.

FX5 Soft OLED is the same type of OLED used on original panels and is considered the highest grade of aftermarket OLED for iPhone screens. It offers an OLED Break Warranty so if the OLED breaks, it is covered.

Soft OLED is the same type of OLED used on original panels and is considered the highest grade of aftermarket OLED for iPhone screens. It offers the best colors, brightness, and touch responsiveness out of all aftermarket OLEDs. These are strong and flexible OLEDs similar to those used in OEM screens.

Premium FOG uses new LCD/OLED panels with aftermarket flex cables. They offer similar color and brightness specifications as refurbished screens, but these high quality aftermarket screens are a great price alternative to premium refurbished screens.

Premium refurbished screens use original panels removed from devices with original flex cables. The original LCD/OLED panels are re-glassed and being original parts, they offer similar performance and screen specifications as originals. These are the highest quality screens available beside OEM Pulls.

IG3 is our standard third-party manufactured replacement part. IG3 has higher quality components than other standard panels available on the market. IG3 comes with a high range backlight for better colors, ESR for brighter LCDs, and polarization. Our team works closely with the third-party manufacturer to deliver the IG quality standards you can trust.

Incell screens have an infused LCD + digitizer, which allows them to be thinner than other aftermarkets and offer a lower defective rate.

FX5 XR and 11 screens are QC’d with FX5 standards. We source new original LCDs for these panels, which offers the similar coloring of a Premium FOG or Premium Refurbished screen.

FX5 Hard OLED is offered on models that we work directly with trusted factories to offer full warranty coverage on all OLED breaks. Hard OLED quality is considered to be more fragile than soft OLED, but we decrease that percentage through our higher quality materials and manufacturing processes.

Hard OLED screens are non FX5 branded Hard OLED panels. Hard OLED quality is considered to be more fragile than soft OLED. These Hard OLED screens are similar to our FX5 in specifications but do not meet our FX5 standards. Thus the most important difference is that we DO NOT warranty OLED panel damage for these screens.

FX5 Soft OLED is the same type of OLED used on original panels and is considered the highest grade of aftermarket OLED for iPhone screens. It offers an OLED Break Warranty so if the OLED breaks, it is covered.

Soft OLED is the same type of OLED used on original panels and  is considered the highest grade of aftermarket OLED for iPhone screens. It offers the best colors, brightness, and touch responsiveness out of all aftermarket OLEDs. These are strong and  flexible OLEDs similar to those used in OEM screens.

Premium FOG uses new LCD/OLED panels with aftermarket flex cables. They offer similar color and brightness specifications as refurbished screens, but these high quality aftermarket screens are a great price alternative to premium refurbished screens.

Premium refurbished screens use original panels removed from devices with original flex cables. The original LCD/OLED panels are re-glassed and being original parts, they offer similar performance and screen specifications as originals. These are the highest quality screens available beside OEM Pulls.

FX5 Digitizers use high-quality materials and no small details are skipped. They offer better bracket alignment, pre-installed home button spacers and premium quality glass. These also are covered under the FX5 Glass Break Warranty. (TESA tape pre-installed)

FX5 w/ Home Button Digitizers use high-quality materials and no small details are skipped. They offer better bracket alignment, pre-installed home button spacers and premium quality glass. These also are covered under the FX5 Glass Break Warranty. (TESA tape pre-installed)

Aftermarket digitizers use lower quality materials that will function well, but at a lower price. (TESA tape pre-installed)

Aftermarket digitizers + LCD assemblies use LG LCDs and aftermarket components to give a working part at lower price. The digitizer and LCD are pre-assembled. (TESA tape pre-installed)

Aftermarket w/ home button digitizers use lower quality materials that will function like normal to help get your device working again. These digitizers also have the home button assembly installed. (TESA tape pre-installed)

Premium digitizers use the highest quality materials available to provide a premium repair that offers similar to original specifications. These digitizers have gold borders. (TESA tape pre-installed)

Premium digitizer + LCD assemblies use original refurbished panels and premium quality glass. The digitizer and LCD are pre-assembled. (TESA tape pre-installed)

Premium Refurbished iPad screens are digitizer + LCD assemblies that use original refurbished panels and premium quality glass. (TESA tape pre-installed)

Premium w/ home button digitizers use the highest quality materials available to provide a premium repair that offers similar to original specifications. These digitizers have gold borders and also have the home button assembly installed. (TESA tape pre-installed)

Premium without Daughterboard panels are for the iPad Pro 12.9 1st and 2nd gen assemblies. These use original refurbished panels and do not have the daughterboard preinstalled. Transferring of the daughterboard from the original screen via soldering is required during this repair. (TESA tape pre-installed)

Premium w/ Daughterboard panels are for the iPad Pro 12.9 1st and 2nd gen assemblies. They use original refurbished panels and have the daughterboard pre-installed. (TESA tape pre-installed)

Incell LCD Samsung screens use Aftermarket Incell technology to provide an affordable part for many A series Samsung screens. These help keep repair costs down compared to using an OLED refurb or service pack.

Aftermarket OLED screens use high-quality aftermarket OLED panels and aftermarket frames. We also have them available without frame.

Refurbished no frame screens are original OLED panels that are re-glassed. These screens do not include the frame. They offer the highest quality screens and are as close to original that is available on the market.

Refurbished w/ frame are original OLED panels that are re-glassed and adhered to an aftermarket frame to help save you time. They offer the highest quality screens and are as close to original that is available on the market

Genuine service packs are brad new OEM Samsung panels directly from Samsung’s supply chain. They are the highest grade of screen available for Samsung.

OEM pulls are original parts pulled from an original device. All OEM pull panels will have a grading (A, B, or C Grade), which refers to only the cosmetic condition of the glass and not the performance or functioning of the part.