Hydronaut
High performance thermal grease for watercooling.
Hydronaut can be used for overclocking due to it's excellent thermal conductivity, but it was created specifically for users with larger-scale cooling solutions, who are looking for a quality product with an excellent price-performance ratio, for example for their water cooling system.
- Delivers optimal heat transfer capabilities for larger-scale cooling solutions like water cooling systems.
- Consists of a silicon-free structure. The makes it very light and highly flexible and easy to apply.
- Achieves best results if used on medium to large scale cooling solutions. This product is ROHS-compliant for demanding users.
-
Suited for overclocking.
-
Excellent thermal conductivity.
-
No curing.
-
Silicone free.
-
No electrical conductivity.
Kryonaut thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community. Kryonaut is also highly recommended as a top product for critical cooling systems in the industrial environment.
-
Designed for overclocking.
-
No curing.
-
Long-term durability.
-
No electrical conductivity.
-
Excellent thermal conductivity.
Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus guaranteeing remarkable heat transfer.
Our Conductonaut liquid metal thermal compound is designed for applications that require very high efficiency. Conductonaut is recommended for experienced users who are looking for a top performance product with best heat dissipation where temperature ranges are above 8 °C.
-
Ultra high thermal conductivity.
-
Increased indium content.
-
Easy application with a synthetic needle.
Thermal Grizzly Conductonaut is a liquid metal thermal compound based on a eutectic alloy. Our special mixture of metals like tin, gallium and indium, Conductonaut excels with a very high thermal conductivity. We recommend to apply Conductonaut on nickel plated surfaces since this will provide the best long term stability in performance.
TG Remove
Thermal interface material cleaner.
TG Remove was developed by Thermal Grizzly with the focus on removing thermal paste and residues in the most efficient way.
The cleaner has deep cleansing properties which helps removing remaining conventional thermal paste but also liquid metal based thermal compounds such as Conductonaut.
-
Typical application.
-
Electrical conductivity.
The degreasing effect helps to prepare the surface for best liquid metal application.
Thermal Paste Spreader
(3 pack)
Shop nowSpatula for Applying and Spreading Thermal Paste or Liquid Metal on CPU, GPU and Heatsinks.
Liquid Metal Applicator
(3 pack)
Shop nowThe Thermal Grizzly applicators ,allow the application or even distribution of a liquid metal thermal paste.
FAQs
-
It is difficult to spread the thermal paste and/or it comes off the surface while spreading. What can I do?
Prior to application make sure that the surface is clean and there are no residues of any kind. We recommend to clean the surface with TG Remove or any similar cleaner which ideally contains acetone. Make sure your thermal paste has at least room temperature before applying.
The application has to be performed slowly and with some pressure from the top. Avoid any fast sweeping motion, one application across a typical Intel- or AMD-CPU should take at least 3 seconds - The slower you move, the better. -
Should I put the syringe back into the original packaging after application?
Thermal Grizzly packaging is coated from the inside to prevent any kind of UV damage or other environmental influences on the product. For maximum shelf life please put the product back into the bag and make sure to close it with the original cap.
-
How do I keep the thermal pads from drying out?
The thermal pads are also shipped in a special zipper storage bag to keep them from drying out or staining their surroundings. This bag is of course resealable to ensure reusability even after long storage times.
-
I’m missing the applicator/spatula to apply my thermal paste. What can I do?
Even though we recommend to spread the thermal paste evenly across the whole surface you can alternatively also draw a thin X across your chip. The mounting pressure will spread the thermal paste between the two surfaces. However, make sure not to use too much paste.
-
Is Thermal Grizzly thermal paste electrically conductive?
'Conventional' Thermal Grizzly thermal paste, such as Aeronaut, Hydronaut, Kryonaut and Kryonaut Extreme is not electrically conductive. Only Thermal Grizzly Conductonaut (liquid metal) is electrically conductive.
-
Why is thermal conductivity no longer listed on the packaging of my Thermal Grizzly product specs?
The thermal conductivity is often determined by theoretical calculations and several variables like mounting pressure, application temperature, surface quality, all of which can change the result in practical applications.
Since Q4/2020 all our cooling products no longer list thermal conductivity values, instead we rely on test results by independent media and testers. These reviews provide a more realistic assessment of our high end products under comparable circumstances.